Description
The Stage 5 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving off-road performance and overall ride quality for the application that will see frequent moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks2.5” lift dual-rate front coil springstubular steel fixed lower and adjustable upper front linksbillet front sway bar linksa triple-rate rear coil spring kitbillet aluminum adjustable upper and lower rear linksa rear sway bar relocation kitfront and rear adjustable track barsand all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).
Features
- 2.5″ lift height
- Front and rear track bars ensure proper alignment and improved articulation
- Adjustablebillet aluminum front sway bar links
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tuneperformancestrengthand durability
- Fits 35″ tires (37″ with extended bump stop spacer kit)
- 33% front23% rear increase in wheel travel
- Improves on and off-road ride quality over stock
- Front upper and lower links included for caster angle correction and improved front end articulation
- Rear billet upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
- Dual rate front coil springs with lifetime guarantee against sagging/breakage
- Triple rate rear coil springs with ICON-engineered drooprideand overload rates
- 2.0 Aluminum Series shocks with vehicle specific valving
- Oem wheels & tires fitment: yes; recommended aftermarket wheels: icon alloys – 17×8.
- 5″ w/ 4.
- 5” backspace / -6mm offset; recommended aftermarket wheels: icon alloys – 18×9″ w/ 4.
- 5” backspace / -12mm offset; recommended aftermarket tires: 35″ x 12.
- 50″ (37″ x 12.
- 50″ with optional bump stop spacer kit pn: 22071); application note #127: will not fit gladiator mojave trim; application note #150: shocks are fully serviceable; tech note: icon’s advertised lift heights are based around a typical jeep jt build which usually includes added weight of accessories such as heavier front bumper/winch.
- Lift heights may be higher than advertised if installed on a stock weighted vehicle.
- ; tech note: diesel models will net approx.
- 1.
- 75″ of front lift over stock due to their heavier weight.
Quick SpecsOverview:
- Spring Material: Steel
- Bushings Included: Yes
- Mounting Hardware Included: Yes
- Spring Color: Black
- Shocks Included: Yes
- Grade Type: Performance
- Maximum Lift: 2.5 IN
- Coil Spring End 1 Type: Open
- Coil Spring End 2 Type: Open
- Coils Quantity Front: 2
- Coils Quantity Rear: 2
- AAP_UDA_12: EA
- AAP_UDA_22: 1
- AAP_UDA_4: 55
- Add-On Part: 22071 – 20-UP JT EXTENDED BUMP STOP SPACER KIT
- Add-On Part: 191014 – .25″ COLLAR SPANNER PIN WRENCH
- Add-On Part: 22042 – 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
- California Prop 65 Warning: Yes
- California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancerand birth defects or other reproductive harm.
- OEM Wheels &
- Tires Fitment: Yes
- Recommended Aftermarket Tires: 35″ x 12.50″ (37″ x 12.50″ with optional bump stop spacer kit part # 22071)
- Recommended Aftermarket Wheels: ICON Alloys – 20×9 w/ 4.5″ Backspace / -12mm Offset
- Recommended Aftermarket Wheels: ICON Alloys – 17×8.5 w/ 4.5″ Backspace / -6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys – 18×9 w/ 4.5″ Backspace / -12mm Offset
- Title: 20-UP JEEP GLADIATOR 2.5″ STAGE 5 SUSPENSION SYSTEM (BILLET)
Additional Specifications:
- Country of Origin: US
- Weight (lbs): 174.0
- Vehicle Specific Fitment: Y
Instructions
I22021_REVA.pdf
Fitment
: N/A
Reviews
There are no reviews yet.